Portable Rechargeable Nail Drill, 45,000 RPM E-File with 6 Bits
A portable nail drill is the quickest way to take on shaping, smoothing and removal at home or on the move. This rechargeable e-file packs a handpiece, a battery-powered control unit and a starter set of bits and sanding bands into one kit, with a dial that goes from 0 to 45,000 RPM so you can work gently or fast.
The control unit is about the size of a phone, so it sits on the table next to you or travels in a bag. A digital display shows the speed and the battery level, and a forward and reverse button lets you work comfortably whichever hand you use.
What is in the set
A wall charger is not shown in the box.
- White control unit with built-in rechargeable battery.
- Handpiece with a bit lock system.
- 6 drill bits: needle, bullet, tapered, small cylinder, big cylinder and a mandrel for sanding bands.
- 6 sanding bands.
- USB charging cable (USB-A to USB-C).
Why you will like it
- Speed dial from 0 to 45,000 RPM with the number on the display.
- Forward and reverse switch and a pause button.
- Built-in battery, charged in about 3 hours, with a working time of roughly 8 to 10 hours on a full charge.
- Aluminum alloy handpiece with ventilation holes.
- Compact body of about 15 cm by 7 cm (5.9 by 2.8 in) with a 14 cm (5.5 in) handpiece.
How to use it
- Charge the unit with the USB cable until the battery indicator is full.
- Open the handpiece, insert a bit and lock it.
- Choose forward or reverse, then turn the dial to a low speed to begin.
- Bring the bit to the nail lightly and keep it moving.
- Raise the speed as you gain control and pause when you want to stop.
Good to know
Start with a low speed and a light touch. Bits wear and should be replaced when they stop cutting well. The set is sold in white. The collet size is not stated, so check the fit before you plan on using bits other than the ones in the set.
Pairs well with
- Tungsten Carbide Nail Drill Bit Sets: 3, 5 or 10 Pack
- Nail Drill Bit Storage Box: 25 Holes, Aluminum with Clear Acrylic Top
Frequently asked questions
Is it rechargeable?
Yes. It has a built-in battery that charges over USB, with about 3 hours charging time and 8 to 10 hours of working time.
What speed does it reach?
The dial goes from 0 to 45,000 RPM and the display shows the current speed.
Can I run it in reverse?
Yes. A forward and reverse button lets you choose the direction.
What comes with it?
The control unit, handpiece, 6 bits, 6 sanding bands and a USB charging cable.
Is it suitable for beginners?
It is described for both beginners and experienced users. Start at a low speed and learn the feel of each bit.